- info@supamarinepaints.com.na
- +264 64 207 600
Jotacote Universal N10 is a PSPC-approved high abrasion resistant universal primer. Jotacote Universal N10 is specially designed as an all-round, all-year newbuilding coating where fast dry-to-handle is required. It can be used as a primer, midcoat, finish or as a single-coat system in atmospheric and immersed environments. Jotacote Universal N10 can be applied at low temperatures. It has a low VOC content and can be used for most areas on new constructions. Jotacote Universal N10 is IMO PSPC for WBT and COT approved. It can be applied to all areas on a vessel in all seasons, having a wide temperature range from -10 ℃ to 40 ℃.
Jotafix Epoxy Primer is a surface-tolerant epoxy mastic primer specially designed for brush and roller. It is specially designed for areas where optimum surface preparation is not possible or desired and provides protection in environments with high corrosivity. Jotafix Epoxy Primer can be used as a primer, midcoat, finish coat or as a single-coat system in marine atmospheric environments and can be applied by brush and roller. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and a range of aged coating surfaces. It can be applied at sub-zero surface temperatures.
Penguard Primer is a high-molecular-weight epoxy primer for new construction. It can be used as a primer as part of a complete system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.
Balloxy HB Light is an epoxy mastic coating specially designed for maintenance and repair of water ballast tanks. It is surface-tolerant and the high solids make it especially well-suited for areas where optimal surface preparation is not possible or desired. Balloxy HB Light provides long-lasting protection in environments with high corrosivity, and can be used as primer, midcoat or finish coat in atmospheric environments. It can be used on properly prepared carbon steel, galvanized steel, stainless steel, aluminum and a range of aged coatings. Balloxy HB Light can be applied at sub-zero temperatures. Balloxy HB Light is IMO PSPC for WBT, approved for use on newbuildings as well as repair situations for medium and long-term protection. Balloxy HB Light is compatible with ballast water treatment systems.
Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair. Jotamastic 80 is a high solids product especially suited for areas where optimal surface preparation is not possible or required. Jotamastic 80 can be used as a primer, midcoat or as a single-coat system in atmospheric environments. It can be applied at sub-zero surface temperatures on properly prepared carbon steel, and on aged coating surfaces. For immersed environments Jotamastic 80 Aluminium is suitable.
Jotamastic 90 is a tintable surface-tolerant abrasion resistant epoxy mastic primer designed for maintenance and repair. It contributes to green building rating points by meeting the requirements for IEQ under LEED 2009, and EQ and MR under LEED v4, Mat 01 under BREEAM International (2016) and Hea 02 under BREEAM International (2013).
Jotamastic 90 product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system. It is specially designed for areas where optimum surface preparation is not possible or required and provides long-lasting protection in environments with high corrosivity. It can be used as a primer, midcoat, finish coat or as a single-coat system in atmospheric and immersed environments. Jotamastic 90 is suitable for use on properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub-zero surface temperatures.
Jota Armour is a tough, abrasion resistant polyamine cured epoxy coating, specially designed as an anti-skid coating for decks and walkways. Jota Armour combines a high solid, surface tolerant and abrasion-resistant epoxy coating with anti-skid aluminium oxide. The surface profile is rough and with a high coefficient of friction that provides exceptional non-slip properties for people and equipment.
Pilot II is an easy-to-use alkyd topcoat with a glossy finish. It is easily applied with brush, roller or spray on both aged and new coatings and is quick and easy to use. Pilot II requires no mixing and has no pot life restrictions, reducing time spent on preparation, waste, spillage, and leftover paint – reducing application costs. It has an aesthetically pleasing appearance and is available in a full assortment of colours.
Jotun Pioner Topcoat 2A is a one-component, physically drying acrylic coating that offers a semi-gloss finish with good gloss retention. It is fast drying, and should be used as a topcoat in atmospheric environments. It is suitable for topsides and superstructure within marine industries, as well as a wide range of industrial structures. Pioner Topcoat 2A is available in various colours with Jotun’s Multicolor Industry tinting system.
This is a one component physically drying acrylic coating. It has a matt finish. It is a high build product. It is fast drying. It can be used direct to metal. To be used as topcoat in atmospheric environments. It can be applied at sub zero surface temperatures
Penguard Topcoat is a polyamide cured epoxy topcoat with proven performance since the 1960s. It has very good chemical resistance which provides lasting protection. Penguard Topcoat has a glossy finish with fair gloss retention and can be used on primed steel and concrete surfaces for both marine and protective assets.
Hardtop AX is a polyurethane topcoat with a robust finish, a good glossy finish that lasts and low VOC. Its robust finish with strong mechanical properties, very good chemical resistance and a low dirt pick up – combined with very good colour – and gloss retention – ensures a glossy finish that lasts. Hardtop AX has high sag resistance, will give minimal spray dust and cures at low temperatures – making it easy to achieve a smooth finish and good result. It has very good application properties by airless spray, brush and roller, making it very user friendly. The products do not contain solvents defined as hazardous air pollutants (HAPs). Hardtop AX can be used for topsides, decks, superstructures on ships, in offshore environments, refineries, power plants, bridges, buildings and for other industrial uses. Minor amounts of solvents may come in through tinting in some colours.
Hardtop XP is a polyurethane topcoat with good durability and excellent application properties. It has a durable finish with good colour- and gloss retention. Hardtop XP has an optimised rheology and flow giving it excellent application properties by airless spray, while also being suitable for brush and roller application. Hardtop XP is truly an all-round polyurethane topcoat for both marine and protective structures.
Seaforce Active is a one-component acrylic, hydrolysing anti-fouling coating based on Hydractive technology™, which helps to improve the biocide delivery and controls the leach layer development. As a part of the SeaForce range, the self-polishing, low-friction characteristics give effective protection against fouling and minimise hull deterioration.
SeaQuantum Ultra S reduces fuel consumption and carbon emissions by up to 10.2%* and enables ultra-low frictional resistance on the underwater hull, made possible through highly effective biofouling control and a smooth, self-polishing surface profile. SeaQuantum Ultra S is a tailor-made, faster polishing silyl acrylate antifouling coating with a verifiable 2.5%* speed loss for low- to medium-activity vessels, including bulk carriers, tankers and slow steaming vessels.
SeaForce Active Plus provides reliable performance, meeting basic needs at an affordable price. Suitable for application on all vessel types with varying speed and activity, it is recommended for newbuildings and drydockings and can be used in specific areas for offshore constructions.
SeaMate M offers improved fouling protection and fuel savings at an optimised price. SeaMate M can contribute to reduction of fuel consumption and carbon emissions by up to 5.7% and enables low frictional resistance on the underwater hull providing successful, reliable and long-lasting protection. This helps customers to maintain speed and schedule with an extended docking interval up to 90 months. It is only recommended for underwater hull applications in drydockings.
This is a one component high solid hydrolysing antifouling coating based on ion exchange technology. It provides cost efficient fouling protection. This is achieved by self polishing characteristics reducing hull deterioration. To be used as finish coat in immersed environments only. Suitable on approved primers and tie coats on aluminium and carbon steel substrates.
Contact the Supa Marine Paints team today for unmatched guidance on all your coating needs and marine anodes. With a wealth of knowledge and years of experience, our certified professionals are here to ensure you get the best solutions for your projects. Reach out now and experience the difference expertise makes!
Contact us Today